ORiK Laser Scanning

Home / FAQ

Questions and answers.

If yours is not here, call (774) 786-3060 or email kiro [at] oriklaserscanning.com.

The basics

What is 3D laser scanning?

A laser scanner measures millions of points on every surface it can see. Together the points form a 3D record of the building called a point cloud. Plans and models are then drawn from it.

What is a point cloud?

It is the raw result of a scan: millions of measured points, each with a position in space. It looks like a 3D photograph you can measure. It opens in Revit, AutoCAD and other design software.

What is scan to BIM?

It means building a 3D Revit model of the existing building from the point cloud. The model has real walls, doors, floors and columns that your design team can work with.

What does LOD mean?

Level of Development. It describes how much detail a model element carries. At LOD 200 an element has an approximate size and place. At LOD 300 it has its real size, shape and position. We agree the level with you in the quote.

What is the difference between as-built drawings and a model?

Drawings are 2D: plans, sections and elevations. A model is 3D, and drawings can be cut from it. If your team works in AutoCAD, drawings are usually enough. If it works in Revit, a model saves time.

Accuracy and limits

How accurate is a scan?

It depends on the scanner and the distance. Leica rates the RTC360 at 1.9 mm at 10 m and the BLK360 at 4 mm at 10 m. The handheld BLK2GO is rated at about 10 mm indoors. We tell you which scanner we plan to use and why.

Can a scanner see inside walls or above ceilings?

No. A scanner records what is in its line of sight. We can scan above a ceiling where tiles are lifted or there is an access panel. Anything we could not reach is listed in the scan report.

Are you licensed land surveyors?

No. We document buildings. We do not set property lines or produce boundary surveys. For those you need a licensed land surveyor.

Can your drawings be used for a permit?

They can be used as the existing-conditions base for a permit set. A licensed architect or engineer must prepare, stamp and file the set.

On site

Do we have to close the building?

No. We can scan occupied spaces and active job sites. People moving through are filtered out of the data.

How long does scanning take?

It depends on the size and layout of the building. A small commercial space is often scanned in a few hours. Larger buildings can take more than one day. The quote gives the time on site.

What do you need from us on scan day?

Access to every room you want measured, and a contact who can open locked doors. Clear floors and open ceiling tiles help where you need detail.

Can you scan at night or on weekends?

Yes. Tell us the hours that work for your building when you ask for a quote.

Do you scan exteriors and roofs?

Yes, exteriors from the ground. Roofs are scanned where there is safe access.

Cost and delivery

How much does it cost?

It depends on the size of the building, how complex it is and what you need delivered. Send us the details and we will give you a written quote before any work starts.

How long until we get our files?

It depends on the size of the building and the deliverable. A point cloud is ready soonest. Drawings and models take longer. Your quote gives a delivery date.

What file formats do you deliver?

Point clouds in .RCP, .E57 or .LAS. Drawings in .DWG and PDF. Models in .RVT. Other formats such as .NWD, .IFC and .OBJ are available on request.

Do we need special software?

Not to view the result. We can send PDF drawings and a web walkthrough that opens in a browser. To work with a point cloud or model you need Revit, AutoCAD or similar.

Where do you work?

Across Rhode Island, Massachusetts and New Hampshire. We are based in Smithfield, Rhode Island.

Who owns the scan data?

You do. We deliver the full point cloud with your files so you can use it on future projects.

Still have a question? Ask us.

Call(774) 786-3060Get a scan quote